IPS e.max CAD
IPS e.max CAD is the world's best-selling glass-ceramic1. It is suitable for the efficient fabrication of full-contour restorations and it is known for its versatile application options, comprehensive range of indications and for its high strength of 530 MPa2.
Both its esthetic properties and durability have been confirmed in everyday clinical practice. As a result, the material can be used to fashion full-contour crowns of only 1-mm thickness, which are subsequently seated with the adhesive technique.
IPS e.max CAD Crystall./ Shades/Stains and Glaze is a universal range of stains and glazes. The glaze is available in two versions - with or without fluorescent effect. Minor corrections (e.g. proximal contact areas) can be applied to IPS e.max CAD restorations using IPS e.max CAD Crystall./Add-On.
Comprehensive range of applications
A wide variety of restorations can be produced with these materials – from thin veneers to three-unit bridges (up to the second premolar as the terminal abutment). High esthetic standards are fulfilled due to the four different levels of translucency of the A-D shades and the special Bleach and Impulse shades.
The IPS e.max CAD and Telio CAD range comprises blocks that come with a pre-fabricated interface for the direct cementation to a titanium bonding base, e.g. Dentsplay Sirona TiBase. This allows implant-supported hybrid abutments and hybrid abutment crowns to be created at chairside using clinically proven products3-8. Cementation is achieved with the self-curing Multilink Hybrid Abutment luting composite.
IPS e.max CAD HT (High Translucency) - The minimally invasive block
Given their high translucency which is similar to that of natural enamel, HT blocks are ideal for the fabrication of small restorations (e.g. inlays, onlays). Restorations made of HT blocks convince user with their true-to-nature chameleon effect and the exceptional adaptation to the remaining tooth structure.
IPS e.max CAD MT (Medium Translucency) - The bright block
MT blocks demonstrate medium translucency and are used for restorations that require more brightness than HT restorations and more translucency that LT restorations.
IPS e.max CAD LT (Low Translucency) - The versatile block
Given their low translucency which is similar to that of the natural dentin, LT blocks are ideal for the fabrication of larger restorations (e.g. posterior crowns). Restorations made from LT blocks convince users with their lifelike brightness and chroma. This prevents the incorporated restorations from greying.
IPS e.max CAD MO (Medium Opacity) - The classical block
Given their particular opacity, MO blocks are ideally suitable for the fabrication of frameworks on slightly discoloured preparations. They are primarily used in the dental laboratory.
IPS e.max CAD I (Impulse) - The opalescent block
The Impulse block enable the fabrication of restorations with pronounced opalescent properties. The opalescent blocks are available in two versions with different opalescence values (Opal 1 and Opal 2). The blocks are suitable for veneers in light tooth shades, which require an opalescent effect.
Types of restorations
- Minimally invasive crowns (≥ 1.0 mm)9
- Three-unit bridges (up to the second premolar as the terminal abutment)
- Implant-supported hybrid restorations (hybrid abutments, hybrid abutment crowns)
- Veneers, thin veneers (0.4 mm) and occlusal veneers
- Inlays, onlays, partial crowns
- Excellent esthetics and high strength of 530 MPa2, efficiently obtained in the dental practice
- Full range of processing options for your chairside CAD/CAM system
- Adhesive, self-adhesive and conventional cementation options, despending on the restoration type
Clinical long-term success and scientifically documented results
1 Based on sales figures
2 Average biaxial flexural strength, over a period of 10 years, R&D Ivoclar Vivadent, Schaan, Liechtenstein
3 De Angelis P, Passarelli PC, Gasparini G, Boniello R, D'Amato G, De Angelis S. Monolithic CAD-CAM lithium disilicate versus monolithic CAD-CAM zirconia for single implant-supported posterior crowns using a digital workflow: A 3-year cross-sectional retrospective study. J Prosthet Dent 2019.
4 Zhang Y, Tian J, Wei D, Di P, Lin Y. Quantitative clinical adjustment analysis of posterior single implant crown in a chairside digital workflow: A randomized controlled trial. Clin Oral Implants Res 2019.
5 Linkevicius T, Linkevicius R, Alkimavicius J, Linkeviciene L, Andrijauskas P, Puisys A. Influence of titanium base, lithium disilicate restoration and vertical soft tissue thickness on bone stability around triangular-shaped implants: A prospective clinical trial. Clin Oral Implants Res 2018;29:716-724.
6 Joda T, Bragger U. Time-efficiency analysis of the treatment with monolithic implant crowns in a digital workflow: a randomized controlled trial. Clin Oral Implants Res 2016;27:1401-1406.
7 Erhan Comlekoglu M, Nizam N, Comlekoglu MD. Immediate definitive individualized abutments reduce peri-implant bone loss: a randomized controlled split-mouth study on 16 patients. Clin Oral Investig 2017.
8 Joda T, Ferrari M, Bragger U. Monolithic implant-supported lithium disilicate (LS2) crowns in a complete digital workflow: A prospective clinical trial with a 2-year follow-up. Clin Implant Dent Relat Res 2017;19:505-511.
9 On the basis of long-term clinical evidence and the material's high strength, the fabrication of crowns with a minimum thickness of 1 mm is permissible if an adhesive cementation technique is used.